Husky 716 Air-Operated Diaphragm Pumps
คำอธิบาย
Husky 716 Air-Operated Diaphragm Pumps ¾ inch Positive Displacement Double Diaphragm Pump
The Husky 716 has a ¾ inch (19.05 mm) connection and is available in aluminum and stainless stee
The Husky 716 air-operated diaphragm pump features an external controller for remote control capabilities.
Benefits of the Husky 716 double diaphragm pumps
- Center and end porting options
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
| Overview | |
| Maximum fluid flow | 16 gpm (61 l/min) |
| Maximum Fluid Discharge Pressure | 100 psi (7 bars, 0.7 MPa) |
| Maximum size pumpable solids | 3/32 in (2.5 mm) |
| Fluid displacement per cycle | 0.04 in (0,64 liter) |
Husky 716 Performance
Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:
- Step 1 – Go to our Pump Selector Tool
- Step 2 – Fill in your pumps part number in the right corner
- Step 3 – Get an overview of all repair kits and accessories for your pump.
| Husky 716 Air-Operated Diaphragm Pumps | |
| Maximum Fluid Working Pressure | 7 bar, 0.7 MPa |
| Air Pressure Operating Range | 2.1 to 7 bar, 0.2 to 0.7 MPa |
| Maximum air consumption | 0.672 m³/minute |
| Maximum free-flow delivery | 61 lpm |
| Maximum pump speed | 400 cpm |
| Gallons (Liters) per cycle | 0.15 |
| Maximum suction lift (water with buna balls) | 4.5 m dry, 7.6 m wet |
| Maximum size pumpable solids | 2.5 mm |
| Operating Temperature Range (These temperatures are based on mechanical stress only and may be altered significantly by pumping certain chemicals. Consult engineering guides for chemical compatibilities and temperature limits, or contact your Graco distributor. Santoprene® is a registered trademark of the Monsanto Company. Loctite® is a registered trademark of the Loctite Corporation.) | |
| Minimum, all pumps | 4°C |
| Maximum, acetal pumps | 82°C |
| Maximum, polypropylene pumps | 66°C |
| Maximum, aluminum, stainless steel, PVDF pumps | 107°C |
| Sound power level (measured per ISO standard 9614–2) | |
| At 70 psi (4.8 bar, 0.48 MPa) at 50 cycles per minute | 77 dB(A) |
| At 100 psi (7 bar, 0.7 MPa) at maximum cycles per minute | 95 dB(A) |
| Sound pressure level (measured 1 m from pump) | |
| At 70 psi (4.8 bar, 0.48 MPa) at 50 cycles per minute | 67 dB(A) |
| At 100 psi (7 bar, 0.7 MPa) at maximum cycles per minute | 85 dB(A) |
| Inlet/Outlet Sizes | |
| Air inlet size | 1/4 npt(f) |
| Air exhaust port size | 3/8 npt(f) |
| Fluid inlet size | 3/4 npt(f), bspt(f), or bspp(f) |
| Fluid outlet size | 3/4 npt(f), bspt(f), or bspp(f) |
| Wetted Parts (in addition to ball, seat, and diaphragm materials, which vary by pump) | |
| Aluminum pumps | aluminum, stainless steel, PTFE, zinc-plated steel |
| Stainless steel pumps | 316 stainless steel, PTFE |
| Non-wetted external parts | |
| All pumps | polypropylene, stainless steel, polyester (labels), nickel-plated brass, epoxy-coated steel (feet) |
| Weight | |
| Aluminum pumps | 3.9 kg |
| Stainless steel pumps | 8.2 kg |
ข้อมูลเพิ่มเติม
| Brand | GRACO |
|---|---|
| Part Number | D53311 |
| Model | Husky 716 |
| Maximum fluid flow | 16 gpm (61 l/min) |
| Maximum Fluid Discharge Pressure | 100 psi (7 bars, 0.7 MPa) |
| Maximum size pumpable solids | 3/32 in (2.5 mm) |
| Fluid displacement per cycle | 0.04 in (0,64 liter) |
รีวิว
ยังไม่มีบทวิจารณ์