Klubertec ST 4-701 : KLUBER

คำอธิบาย

Klubertec ST 4-701 : KLUBER

Klübertec ST 4-701 is a thin-bodied mixture of ester oil and
aliphatic hydrocarbons. Its synthetic structure provides
improved lubricity during the stamping of metal sheets plus a
wear reducing effect on machine tooling.
The solvent contained (90 %) evaporates upon application so
that subsequent processes (welding, glueing, painting) are not
affected in most cases.

Klubertec ST 4-701 : KLUBER

Application
– Blanking & drawing of steel and non-ferrous sheet metal
between 0.2 and 2.5 mm thick
– Rolling, deep drawing, edging and folding, e.g. in the
manufacture of drum lids
– Preserving steel components, e.g. brake parts
– Corrosion protection of assembly components

Application notes
The product can be applied by
– spraying

– rolling (felt rollers)
– spot application
– immersion
over the entire width of the sheet or on predetermined parts.
The lubricating film thickness can be increased by adding
Klüberfluid 9 R 100, thus increasing the forming capacity, e.g.
forming of sheets to a thickness up to 3 mm and draw depth of
100 mm (steel sheets to a thickness of approximately 1.5 mm).
Evaporation upon process completion can be accelerated by
moving air (fan, etc.) or heat (not above 60 °C).

Material safety data sheets
Material safety data sheets can be requested via our website
www.klueber.com. You may also obtain them through your
contact person at Klüber Lubrication.